LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2019 >> Cruze L >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Starting System And Charging System >> Repair Instructions >> Battery Current Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Record all of the radio station presets.
  2. Ensure that all lamps and accessories are turned off.
  3. Turn the ignition OFF and remove the ignition key.
  4. Open the rear compartment lid.
  5. Rear Compartment Floor Panel Trim Replacement (Notchback)Rear Compartment Floor Panel Trim Replacement (Hatchback) - Remove
  6. Rear Compartment Floor Panel Trim Support Replacement - Remove
  7. Open the right rear door.
  8. Fold the rear seat back cushion forward to get a better access to the battery.
  9. Battery Negative Cable Disconnection and Connection  - Disconnect
  10. GM4091388Courtesy of GENERAL MOTORS COMPANY

    Loosen the battery negative pole clamp nut (2).

  11. Disconnect the battery negative pole clamp (1).
  12. GM4091410Courtesy of GENERAL MOTORS COMPANY

    Remove body extension current sensor wiring harness to battery negative cable bolt (1).

  13. GM4091389Courtesy of GENERAL MOTORS COMPANY

    Disconnect the battery current sensor connector. (2)

  14. Battery Negative Cable Clip (1) - Unclip [2x]
  15. GM4091391Courtesy of GENERAL MOTORS COMPANY

    Remove the battery negative cable terminal cover (1).

  16. Battery Current Sensor (2) - Remove