Fastener Specifications
WARNING: This page is about a different car, the 2018 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Brake Caliper Bracket Bolt | |
|
150 N.m (111 lb ft) |
|
45 - 60 degrees |
| Front Wheel Bearing/Hub Bolt | |
|
90 N.m (66 lb ft) |
|
60 - 75 degrees |
| rear Brake Caliper Bracket Bolt | |
|
100 N.m (74 lb ft) |
|
60 - 75 degrees |
| rear Wheel Bearing/Hub Bolt | |
|
50 N.m (37 lb ft) |
|
30 - 45 degrees |
reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Caliper Bleeder Valve | 17 N.m (13 lb ft) |
| Brake Hose-To-Caliper Bolt | 40 N.m (30 lb ft) |
| Front Brake Caliper Guide Pin Bolt | 40 N.m (30 lb ft) |
| Front Brake Rotor Bolt | 9 N.m (80 lb in) |
| rear Axle to Absorber Bolt | 100 N.m (74 lb ft) |
| rear Brake Caliper Guide Pin Bolt | 36 N.m (27 lb ft) |
| rear Brake Rotor Bolt | 9 N.m (80 lb in) |
| Wheel Speed Sensor Bolt | 6 N.m (53 lb in) |