LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2019 >> Sonic LS, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Battery, Starting System And Charging System >> Repair Instructions >> Battery Current Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. GM2027819Courtesy of GENERAL MOTORS COMPANY

    Install the battery current sensor (2) onto the battery negative cable (1).

  2. GM2507827Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Install the battery negative cable frame ground terminal (5) and bolt (4). Tighten to 22 N.m (16 lb ft).

  3. Install the battery tray. Refer to Battery Tray Replacement .
  4. Clip the battery current sensor onto the battery tray.
  5. Connect the battery current sensor to the body harness connector.
  6. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals