LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2019 >> Spark ACTIV, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 204 (Wheel Alignment) >> Specifications >> Fastener Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fastener Specifications

WARNING: This page is about a different car, the 2019 Buick Cascada, 2018 Buick Cascada, and 2017 Buick Cascada. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Threaded Fastener/Component Tightening Specifications

NOTE:

All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. 
Application Specification
Metric (English)
Steering Knuckle Lower Camber Adjust Bolt and Nut
  • First Pass:
 115 N.m (85 lb ft)
  • Final Pass:
 45-60 degrees
Steering Knuckle Upper Camber Adjust Bolt and Nut
  • First Pass:
 70 N.m (52 lb ft)
  • Final Pass:
 45-60 degrees
Reusable Threaded Fastener Tightening Specifications

NOTE:

All fasteners listed in this table can be reused after removal. 
Application Specification
Metric (English)
Steering Linkage Inner Tie Rod Nut 60 N.m (44 lb ft)
scientia non olet · About LEMON Manuals