LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2019 >> Spark LS, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Power Steering System) >> Repair Instructions >> Electronic Power Steering Motor Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the steering column upper trim cover. Refer to Steering Column Upper Trim Cover Replacement .
  2. Remove the steering column lower trim cover. Refer to Steering Column Lower Trim Cover Replacement .
  3. Remove the I/P knee bolster. Refer to Instrument Panel Knee Bolster Replacement .
  4. Disconnect the electrical connector from the electronic power steering motor control module.
  5. Remove the electronic power steering motor control module bracket bolts (1).
    Fig 1: Electronic Power Steering Motor Control Module Bracket Bolts
    GM4024319Courtesy of GENERAL MOTORS COMPANY
  6. Remove the electronic power steering motor control module and bracket assembly from the vehicle.
  7. Remove the electronic power steering motor control module mounting bolts (1).
    Fig 2: Electronic Power Steering Motor Control Module, Bracket And Bolts
    GM4024320Courtesy of GENERAL MOTORS COMPANY
  8. Remove the electronic power steering motor control module (2) from the electronic power steering motor control module bracket (3).
scientia non olet · About LEMON Manuals