Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Battery Monitor Module (2) - Install
Battery Negative Post Clamp Nut (1) - Tighten 4.5 N.m (40 lb in)
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Use an open ended wrench to hold the battery sensor ground tab, while tighten ing the battery negative cable nut.
Battery Negative Cable (2) - Install
Battery Negative Cable Nut (3) - Install and tighten 11 N.m (97 lb in)
Courtesy of GENERAL MOTORS COMPANY

Connect the electrical connector. (1)
Program all of the customer's radio station presets and set the radio clock to the current time.
Perform the battery sensor learn procedure. Battery Sensor Module Learn