Programming an Existing or New Control Module
WARNING: This page is about a different car, the 2019 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
To program an existing or new control module, perform the following procedure:
- Install the special tool: EL-49642 SPS Programming Support Tool
- Ignition - On / Vehicle - In Service Mode
- Access SPS and follow the on-screen instructions for the control module: K71 Transmission Control Module
- Perform the following learn procedure: Transmission Service Fast Learn Procedure (MR8)
NOTE:
Make sure to select the correct country from the drop-down menu.