Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
Install the front wheel speed sensor (2) to the knuckle.
- Install the front wheel speed sensor bolt and tighten to 8.5 N.m (75 lb in).
Attach the front wheel speed sensor harness (3) to the front strut mounted bracket (2).
- Attach the front wheel speed sensor harness (3) to the body frame mounted bracket (1).
Connect the front wheel speed sensor electrical connector (2) to the forward lamp wiring harness.
- Attach the front wheel speed sensor harness clip (1) to the front compartment front inner side rail.
- Install the front bumper fascia opening lower cover. Refer to Front Bumper Fascia Opening Lower Cover Replacement .
- Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
- Lower the vehicle. Refer to Lifting and Jacking the Vehicle .
CAUTION:
Refer to Fastener Caution .