Communication Interface Module Replacement

WARNING: This page is about a different car, the 2019 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: Refer to Battery Disconnect Warning . Preliminary Procedures Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection Remove the driver front seat. Front Seat Removal and Installation .
1	Communication Interface Module Procedure Disconnect the electrical connector. Remove the communication interface module from the communication interface module bracket. Install the driver front seat. Front Seat Removal and Installation Connect the battery negative cable. Battery Negative Cable Disconnection and Connection For programming and set up procedures, refer to Control Module References .

Callout

Component Name

WARNING:

Refer to Battery Disconnect Warning .

Preliminary Procedures

Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection
Remove the driver front seat. Front Seat Removal and Installation .

Communication Interface Module

Procedure

Disconnect the electrical connector.
Remove the communication interface module from the communication interface module bracket.
Install the driver front seat. Front Seat Removal and Installation
Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
For programming and set up procedures, refer to Control Module References .