Programming a New Control Module
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
To program a new control module, perform the following procedure:
- Install the special tool: EL-49642 SPS Programming Support Tool
- Access the Service Programming System (SPS) and follow the on-screen instructions.
- On the SPS Supported Controllers screen, select K114B Hybrid/EV Powertrain Control Module 2 - Programming and follow the on-screen instructions.
- At the end of programming, choose the "Clear All DTCs"
- With a scan tool, perform the Clear Secured High Voltage DTCs and follow the on-screen instructions.
- With a scan tool, Clear All DTCs.