LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Programming And Setup) >> Repair Instructions >> K114B Hybrid/EV Powertrain Control Module 2: Programming and Setup >> Programming an Existing Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming an Existing Control Module

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

To program an existing control module, perform the following procedure:

  1. Install the special tool: EL-49642 SPS Programming Support Tool
  2. Access the Service Programming System (SPS) and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select K114B Hybrid/EV Powertrain Control Module 2 - Programming and follow the on-screen instructions.
  4. At the end of programming, choose the "Clear All DTCs".
scientia non olet · About LEMON Manuals