LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Programming And Setup) >> Repair Instructions >> K132 Pedestrian Alert Sound Control Module: Programming and Setup >> Reprogram ECU
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reprogram ECU

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

To reprogram an existing control module, perform the following procedure:

  1. Install EL-49642  SPS Programming Support Tool.
  2. Access the Service Programming System (SPS) and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select K132 Pedestrian Alert Sound Control Module - Configuration and follow the on-screen instructions.
  4. At the end of programming, choose the "Clear All DTCs" function on the SPS screen.
scientia non olet · About LEMON Manuals