Communication Interface Module Bracket Replacement

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Instrument Panel Center Air Outlet Duct Replacement Instrument Panel Knee Bolster Replacement
1	Communication Interface Module Bracket Bolt [3x] CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Communication Interface Module Bracket Procedure Disconnect the 2 harness retainers. Disconnect the electrical connectors. Transfer components as necessary. Control Module References for programming and setup information, if required.

Callout

Component Name

Preliminary Procedures

Instrument Panel Center Air Outlet Duct Replacement
Instrument Panel Knee Bolster Replacement

Communication Interface Module Bracket Bolt [3x]

CAUTION:

Refer to Fastener Caution .

Tighten
2.5 N.m (22 lb in)

Communication Interface Module Bracket

Procedure

Disconnect the 2 harness retainers.
Disconnect the electrical connectors.
Transfer components as necessary.
Control Module References for programming and setup information, if required.