April 5, 2026: LEMON Manuals is launched! Read the announcement.

UHF Low Energy Remote Control Access Sensor Transceiver Replacement - Position 2

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Raise and support the vehicle. Lifting and Jacking the Vehicle
1	UHF Low Energy Remote Control Access Sensor Transceiver - Position 2 Procedure Disconnect the electrical connector. Release the retaining tabs. Lower the vehicle.

Callout

Component Name

Preliminary Procedure
Raise and support the vehicle. Lifting and Jacking the Vehicle

UHF Low Energy Remote Control Access Sensor Transceiver - Position 2

Procedure