Multifunction Relay Module Bracket Replacement (Without Front View Camera)

WARNING: This page is about a different car, the 2020 Chevrolet Bolt EV. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: While operating, electrical control modules can produce heat and become hotter than their surroundings. To prevent burns allow sufficient time for the module to cool before removal. Preliminary Procedure Inside Air Moisture and Windshield Temperature Sensor Replacement Inside Rearview Mirror Replacement
1	Multifunction Relay Module Bracket Procedure Unclip wiring as necessary. Slide the bracket upward to disengage tabs, gently pull from windshield. NOTE: Releasing the bracket is restricted by headliner. The bracket must be forced into the headliner and then released.

Callout

Component Name

WARNING:

While operating, electrical control modules can produce heat and become hotter than their surroundings. To prevent burns allow sufficient time for the module to cool before removal.

Preliminary Procedure

Inside Air Moisture and Windshield Temperature Sensor Replacement
Inside Rearview Mirror Replacement

Multifunction Relay Module Bracket

Procedure

Unclip wiring as necessary.
Slide the bracket upward to disengage tabs, gently pull from windshield.

NOTE:

Releasing the bracket is restricted by headliner. The bracket must be forced into the headliner and then released.