Unable To Program A Replacement Side Object Detection Control Module (PIT5782C)
Publication date: 2021-04-16Reference number: PIT5782C
Supersedes refnos: PIT5782, PIT5782A, PIT5782B
UNABLE TO PROGRAM A REPLACEMENT SIDE OBJECT DETECTION CONTROL MODULE
TECHNICAL SERVICE BULLETIN
Reference Number(s): PIT5782C, Date of Issue:
Apr 16, 2021
SERVICE INFORMATION
| Brand: | Model: | Model Year: | VIN: | Engine: | Transmission: | ||
|---|---|---|---|---|---|---|---|
| from | to | from | to | ||||
| Buick | Envision | 2021 | All | All | All | All | |
| Cadillac | CT4 | 2020-2021 | All | All | All | All | |
| Cadillac | CT5 | 2020-2021 | All | All | All | All | |
| Chevrolet | Corvette | 2020-2021 | All | All | All | All | |
| Involved Region or Country | North America |
| Condition | Some dealerships may comment after replacing only one of the two Side Object Detection Control Modules (B218R or B218L) they are unable to SPS program the new module and it fails programming. When checking for DTC's there may be a U3000 and/or U3007. |
| Cause | Unknown. |
CORRECTION
Currently, engineering is working on a correction. In the meantime, replacing both Side Object Detection Control Modules (B218R or B218L) at the same time will allow the modules to be SPS programmed.
WARRANTY INFORMATION
For vehicles repaired under the Bumper-to-Bumper coverage (Canada Base Warranty coverage), use the following labor operation. Reference the Applicable Warranties section of Investigate Vehicle History (IVH) for coverage information.
| Labor Operation | Description | Labor Time |
|---|---|---|
| *6486058 | Replace both Side Object Detection Modules and SPS Program | 1.3 Hrs. |
| *This is a unique Labor Operation for Bulletin use only. | ||
Additional SI Keywords
U0232 U0233 U1602 U1603 U1604 U1605
| Version | 4 |
| Modified | 09/30/2020 - Created on. 11/19/2020 - Updated the model list 01/25/2021- Update the model list 04/16/2021 - Update the model list |