LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2021 >> Express 2500 Base, Van Cargo Extended, 2.8L Eng VIN 1 >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup >> Repair Instructions >> K9 Body Control Module: Programming and Setup >> Replace and Program Control Module or Reprogram Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Replace and Program Control Module or Reprogram Control Module

NOTE:

Ensure that all disconnected control modules and devices are connected. After the procedure is completed, the personalization settings of the K9 Body Control Module are set to default settings. Inform the customer that the personalization must be set again.

To program a replacement or an existing K9 Body Control Module, perform the following procedure:

  1. Access the Service Programming System (SPS) and follow the on-screen instructions.
  2. On the SPS Supported Controllers screen, select BCM Body Control Module - Programming and Setup and follow the on-screen instructions.
  3. Clear DTCs.
scientia non olet · About LEMON Manuals