Removal Procedure

Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection (9C1, 5W4) , or Battery Negative Cable Disconnection and Connection (KL9)
Raise and support the vehicle. Lifting and Jacking the Vehicle
Courtesy of GENERAL MOTORS COMPANY

Front Bumper Fascia Skid Plate Bolt (1) - Remove [4x]
Underbody Skid Shield Bolt (2) - Remove [4x]
Courtesy of GENERAL MOTORS COMPANY

Underbody Splash Shield (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
The proper position of the underbody skid shield is between the underbody splash shield and the front frame.

Underbody Splash Shield Bolt (2) - Remove [2x]
Underbody Skid Shield (3) - Remove
Courtesy of GENERAL MOTORS COMPANY

Remove the power steering assist motor wire clip (3).
Remove the power steering control module wiring power harness (1) from the 2 retaining clips (2) and reposition.
Courtesy of GENERAL MOTORS COMPANY

Disconnect the power steering control module wiring power harness (2) from the main power steering wiring harness (1).
Courtesy of GENERAL MOTORS COMPANY

Disconnect the power steering control module wiring power harness (1) from the power steering assist motor.
Remove the power steering control module wiring power harness clip (2) from the electric belt drive rack and pinion steering gear housing.
Remove the power steering control module wiring power harness.