Installation Procedure
WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Connect the electrical connector.
- Restraints Control Module (2) - Install
- Airbag Sensing and Diagnostic Module Nut (1) - Install and tighten [ 3x ] - Fastener Specifications
- Front Floor Console - Install - Front Floor Console Removal and Installation (with M5N)Front Floor Console Removal and Installation (with MQA)
- Enable the SIR System. SIR Disabling and Enabling .
- Perform the necessary programming and setup procedure:Control Module References
CAUTION:
Refer to Fastener Caution .