Removal Procedure
WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Reposition the seat as necessary to access the retaining clips.
- Using a flat-bladed plastic trim tool, release the retaining clips.
- Front Floor Console Extension Panel - Left Side (1) - Remove
Using a flat-bladed plastic trim tool, release the retaining clips.
- Front Floor Console Extension Panel - Right Side (1) - Remove
Front Floor Console Bolt (1) - Remove [ 6x ]
- Front Floor Console Bracket Bolt (2) - Remove [ 2x ]
- Release the tabs (3) on both sides of the front floor console.
Slide the front floor console (1) enough to clear the instrument panel lower center trim panel.
Front Floor Console Variable 1 Liner (1) - Remove
- Use a plastic trim tool to release the transmission control lever boot (2) from the front floor console trim plate.
- Disconnect the electrical connector (3).
- Front Floor Console Trim Plate Bolt (4) - Remove [ 2x ]
Remove the automatic transmission control lever knob (1) by pulling up and releasing the retainer.
Front Floor Console Trim Plate (1) - Remove
Automatic Transmission Range Selector Lever Cable Bolt (1) - Remove
- Automatic Transmission Range Selector Lever Cable (2) - Release
- Disconnect the front floor console wiring harness (3) from the body wiring harness.
Wireless Charging System Module Bolt (1) - Remove [ 4x ]
- Wireless Charging System Module (2) - Remove
- Disconnect the electrical connector.