Circuit/System Verification
WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition - On / Vehicle - In Service Mode
- Perform the scan tool control function:Instrument Panel Cluster Assembly - Illuminate All Indicators
- Verify the component turns On and Off:Cruise Control Indicator
- If the component does not turn On and Off
Replace the component:Instrument Panel Cluster Assembly
- Go to next step: If the component turns On and Off
- If the component does not turn On and Off
- All OK.