Removal Procedure

WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Refer to SIR Warning .

WARNING:

Refer to SIR Inflator Module Handling and Storage Warning .

Disable the SIR system. SIR Disabling and Enabling
Courtesy of GENERAL MOTORS COMPANY

Use a flat bladed plastic trim tool to depress the steering wheel airbag access hole cover detents to remove the 2 steering wheel airbag access hole covers (1).
Courtesy of GENERAL MOTORS COMPANY

Steering Wheel Airbag Bolt(1) - Remove [ 2x ]
Release the connector position assurance (CPA) retainer.
Disconnect the electrical connectors.
Steering Wheel Airbag(2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Loosen the steering wheel bolt (1) so that 2 - 3 threads are engaged.
Disconnect the electrical connector.
Wiggle the steering wheel until the wheel disengages completely.
Steering Wheel Bolt(1) - Remove
Steering Wheel(2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Steering Wheel Bolt(1) @ Automatic Transmission Manual Shift Auxiliary Position Switch - Remove [ 4x ]
Courtesy of GENERAL MOTORS COMPANY

Steering Wheel Bolt(1) @ Steering Wheel Shroud - Remove [ 4x ]
Courtesy of GENERAL MOTORS COMPANY

Steering Wheel Shroud(1) - Remove
Disconnect the electrical connectors.
Courtesy of GENERAL MOTORS COMPANY

Automatic Transmission Manual Shift Auxiliary Position Switch-Right Side(1) - Remove
Disconnect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY

Steering Wheel Bolt(1) @ Steering Wheel Spoke Cover - Remove
Courtesy of GENERAL MOTORS COMPANY

Steering Wheel Spoke Cover(1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Cruise Control Switch(1) - Remove
Disconnect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY

Steering Wheel Bolt(1) @ Cruise Control Switch - Remove [ 3x ]
Cruise Control Release Switch Bracket(2) - Remove
Cruise Control Switch(3) - Remove