Fastener Specifications
WARNING: This page is about a different car, the 2022 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Brake Hose Fitting Gasket |
| Caliper Piston Dust Boot Seal |
| Caliper Piston Seal |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Caliper Bleeder Valve - JL9, J55 Rear | 11 N.m (97 lb in) |
| Brake Caliper Bleeder Valve - Front, J55, J6G | 17-20 N.m (13-15 lb ft) |
| Brake Caliper Bolt - Front (J55, J6G) | |
|
150 N.m (111 lb ft) |
|
15-30 Degrees |
| Brake Caliper Bolt - Front (J6H) | |
|
150 N.m (111 lb ft) |
|
15-30 Degrees |
| Brake Caliper Bolt - Rear (J6G, J6H, J6M) | |
|
100 N.m (74 lb ft) |
|
15-30 Degrees |
| Brake Caliper Bracket Bolt - Front (JL9) | |
|
150 N.m (111 lb ft) |
|
15-30 Degrees |
| Brake Caliper Bracket Bolt - Rear (JL9, J55) | |
|
150 N.m (111 lb ft) |
|
15-30 Degrees |
| Brake Caliper Guide Pin Bolt - Front (JL9) | 47 N.m (35 lb ft) |
| Brake Caliper Guide Pin Bolt - Rear (JL9, J55) | 40 N.m (30 lb ft) |
| Brake Hose Fitting Bolt - Front | 40 N.m (30 lb ft) |
| Brake Hose Fitting Bolt - Rear | 40 N.m (30 lb ft) |
| Brake Rotor Bolt - Front | 9 N.m (80 lb in) |
| Brake Rotor Bolt - Rear | 10 N.m (89 lb in) |
| Brake Shield Bolt | 9 N.m (80 lb in) |