Fastener Specifications
WARNING: This page is about a different car, the 2022 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | |
| Rear Suspension Adjust Link Inner Bolt | Torque mating fastener |
| Rear Suspension Lower Control Arm Inner Bolt | Torque mating fastener |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Rear Suspension Lower Control Arm Inner Nut | |
|
115 N.m (85 lb ft) |
|
75 - 90 degrees |
| Steering Linkage Inner Tie Rod Nut | 80 N.m (59 lb ft) |