Removal Procedure
- Relieve the fuel system pressure. - Fuel Pressure Relief
- Battery Negative Cable Disconnection and Connection (without KL9) , or Battery Negative Cable Disconnection and Connection (with KL9) - Disconnect
- Intake Manifold Cover Replacement - Remove
Cable Tie (1) - Remove and DISCARD
- Disconnect the electrical connector. (2)
Fuel Injection Fuel Rail Fuel Pressure Sensor (1) - Remove and DISCARD
WARNING:
Refer to Diesel/Gasoline Vapors Warning .
WARNING:
Refer to Safety Goggles and Fuel Warning .
NOTE:
Replace the noise cancelling foam component if it is exposed to and has absorbed automotive fluids.