Installation Procedure
Install a NEW vacuum pump gasket (1).
- Install the vacuum pump (2).
Install the vacuum pump bolt retainer (2).
- Install the vacuum pump bolts (3) and tighten. Vacuum Pump Installation
- Radiator Surge Tank - Install - Radiator Surge Tank Replacement
- Power Brake Booster Vacuum Hose - Connect - Power Brake Booster Vacuum Hose Replacement
- Charge Air Cooler Outlet Hose - Install - Charge Air Cooler Outlet Air Hose Replacement
NOTE:
Ensure all passages of the vacuum pump are clean and free of all debris prior to installation.
CAUTION:
Refer to Fastener Caution .