Installation Procedure
WARNING: This page is about a different car, the 2022 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.
- Electronic Suspension Control Module (2) @Electronic Suspension Control Module Bracket (3) - InstallCAUTION:
Refer to Fastener Caution .
- Electronic Suspension Control Module Bracket Nut (1) - Install and tighten [3x] 9 N.m (80 lb in)
- Connect the electrical connector.
- Install the active safety control module and bracket assembly (2) to the vehicle.
- Active Safety Control Module Bracket Nut (1) - Install and tighten [3x] 9 N.m (80 lb in)
- Connect the electrical connectors.
- Quarter Lower Rear Trim Panel (1) - Install - Quarter Lower Rear Trim Panel Replacement