Installation Procedure
Install the EN-51146-2-5 calibrations tools (4) to the fuel injectors (3).
- Lightly coat the fuel injector seal (2) with clean engine oil.
- Fuel Injector (2) @ Fuel Injection Fuel Rail (1) - Install
- Apply thread lock agent to the NEW fuel injector bolts. Refer to Adhesives, Fluids, Lubricants, and Sealers .
- Install the NEW fuel injector bolts to the fuel injectors (3) and tighten to 5 N.m (44 lb in).
- Connect the 4 fuel injector electrical connectors (5).
- Fuel Injection Fuel Rail Assembly Replacement - Install
CAUTION:
Refer to Fastener Caution .