Unsuccessful Programming Recovery

If programming a control module is not successful, perform the following procedure:

1. Verify the control module, data link connector and programming tool connections are secure and the tool software is up to date.
2. Perform the following SPS Programming function:

   K16 Battery Energy Control Module and follow the on-screen instructions.

3. Verify the control module programming is successful.
   • If the programming is not successful 
   1. Vehicle Power Mode state - OFF 
   2. Wait for greater than 1 min.
   3. Vehicle Power Mode state - Service/Run 
   4. Perform the following SPS Programming function:

      K16 Battery Energy Control Module and follow the on-screen instructions.

      • If the programming is not successful - Replace the component: K16 Battery Energy Control Module
      • Go to next step: If the programming is successful
   5. All OK.
   • Go to next step: If the programming is successful 
4. All OK.