Removal Procedure

Disable the high voltage system. High Voltage Disabling
Drain the cooling system. Drive Motor Battery Cooling System Draining and Filling
Courtesy of GENERAL MOTORS COMPANY

Drive Motor Battery Charger Bracket Bolt (1) - Remove
Drive Motor Battery Charger Bolt (2) - Remove [2x]
Drive Motor Battery Charger Bracket (3) - Remove
Courtesy of GENERAL MOTORS COMPANY

Electrical Connector (1) - Disconnect
Disconnect the high voltage electrical connector and release the wiring harness retainers as necessary. (2, 3) High Voltage Connectors
Courtesy of GENERAL MOTORS COMPANY

Disconnect the high voltage electrical connector and release the wiring harness retainers as necessary. (1, 4) High Voltage Connectors
Retainer (2) - Release
Drive Motor Battery Charger Receptacle Coolant Outlet Hose (3) @ Battery Charger - Remove
Courtesy of GENERAL MOTORS COMPANY

Retainer (1) - Release
Drive Motor Battery Charger Inlet Hose (2) @ Battery Charger - Remove
Courtesy of GENERAL MOTORS COMPANY

Hose Clip (3) - Release [2x]
Radiator Inlet Hose (2) - Reposition away
Courtesy of GENERAL MOTORS COMPANY

Disconnect the electrical connector and release the wiring harness retainers as necessary. (3, 4)
Reposition the hood release cable away from the left-side radiator upper bracket. (5)
Radiator Upper Bracket Bolt (1) - Remove [4x]
Radiator Upper Bracket (2) - Remove [2x]
Courtesy of GENERAL MOTORS COMPANY

Reposition the condenser fan and radiator assembly (1) as necessary.
Courtesy of GENERAL MOTORS COMPANY

Drive Motor Battery Charger Bracket Nut - Left Side (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Drive Motor Battery Charger Bracket Nut - Right Side (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Battery Charger (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Drive Motor Battery Charger Bolt (1) - Remove [4x]
Drive Motor Battery Charger Adapter (2) - Remove [2x]