Alignment Mode Selection

Alignment Mode will optimize the vehicle height to provide the most accurate wheel alignment. This mode should be enabled once the vehicle is driven onto the alignment station.

NOTE:

Hood and all doors need to be closed for height adjustment to be performed.

NOTE:

Vehicle has to be taken out of service mode before attempt to put into alignment mode.

1. Engine Running.
2. Set vehicle height to Normal Ride Height.
3. On the Center Stack, navigate to Settings/Vehicle/Suspension.
4. Shift vehicle to Neutral.
5. Activate Alignment Mode.
6. Engine off, ignition ON.
7. After alignment is performed, deactivate Alignment mode (Alignment Mode automatically disables when vehicle speed exceeds 16 km/h (10 mph)).