Rear Window Replacement: Notes
WARNING:
Refer To Cracked Window Warning .
WARNING:
Refer To Glass And Sheet Metal Handling Warning .
WARNING:
When A Lift Gate Hold Open Device Is Being Removed Or Installed, Provide Alternate Support To Avoid The Possibility Of Damage To The Vehicle Or Personal Injury.
CAUTION:
Apply Pressure Only At The End Of The Liftgate/Hood Assist Rod That You Are Removing Or Attaching. Do Not Apply Pressure To The Middle Of The Rod Because Damage Or Bending Will Result.
CAUTION:
Do Not Exceed The Limit Of The Liftgate Power Assist Actuator Ball Socket Joint's Free Motion During Installation To Prevent Possibility Of Damage To The Actuator.
Special Tools
- Bo-24402-A Glass Sealant Remover (Cold Knife).
- Use Commercially Available Glass Cutting Tool.
- Use A Urethane Adhesive Systems Which Meet Gm Specification Gm 3651G