Installation Procedure
Connect the electrical connectors.
- Heated Steering Wheel Module (1) - Install
Steering Wheel Spoke Lower Cover (1) - Install
Connect the electrical connector.
- Install any connector position assurance (CPA) devices or secondary locks.
- Steering Wheel Airbag (2) - Install
- Steering Wheel Airbag Bolt (1) Install and tighten [2x] - Fastener Specifications
- NOTE:
Left side shown, right side similar.
Install the 2 steering wheel airbag access hole covers (1).
- Enable the SIR System. SIR Disabling and Enabling
CAUTION:
Refer to Fastener Caution .