Liftgate Release
- Be sure battery is fully charged and ignition is in "ON" or "ACC" position. Liftgate should unlock when release button is pressed. If not, open liftgate manually and separate connector at solenoid.
- Connect a voltmeter between solenoid connector and ground. With button pressed, at least 10 volts must be present. If not, check power feed and wiring. If voltage is present, check solenoid ground connection.
- With solenoid removed, check plunger spring and plunger for free movement of at least 5/8" (16 mm). Reinstall solenoid and adjust for best operation.