LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1988 >> New Yorker Base >> Repair and Diagnosis >> Engine Performance >> System >> 3.0L MPFI Tests W/Codes >> Charging System Test >> Ch2 - Checking Battery Temp Sensor Calibration
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ch2 - Checking Battery Temp Sensor Calibration

  1. With tester connected to diagnostic connector, put system in Engine Running Test "61". If display on tester reads between .2-3 volts, go to next step. If display on tester is not reading between .2-3 volts, replace SMEC for a bad logic board.
  2. Put system in Engine Running Test "67". If display on tester reads between 13-15 volts, check battery and also check for battery drain down condition. If display on tester is not reading between 13-15 volts, check alternator.
scientia non olet · About LEMON Manuals