LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1989 >> Conquest Standard >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Neutral Safety Switch Adjustment >> Conquest
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Neutral Safety Switch Adjustment: Conquest

  1. Place transmission in Neutral. Remove screw on bottom of neutral safety switch at transmission. This screw is removed for alignment pin installation. Loosen attaching bolts. See Fig 1.
  2. Using an .08" (2.0 mm) alignment pin, move switch until pin falls into hole in rotor. Tighten attaching bolts to 43-61 INCH lbs. (5-7 N.m).
Fig 1: Adjusting Neutral Safety Switch (Conquest)
G82793Courtesy of CHRYSLER MOTORS.
scientia non olet · About LEMON Manuals