DRB-II Key Functions
- YES Or Down Arrow & NO Or Up Arrow
Keys will move lines on screen up or down, allowing technician to choose an item or scroll through all selections available. - F1 & F2 Keys
Keys are used to scroll through sensor displays. - ATM Key
Key will return technician to previous screen. - ENTER Key
Allows technician to select a test or display. The flashing arrow must be on the display user wishes to select. Pressing the ENTER key in the sensor state will cause display to change from a 3-line display to a 1-line display. - F3 Key
Key is used to display a help screen. This key may be used at any time. - Number Keys
Keys are used for choosing a display or test by pressing the number for the test or display. - READ/HOLD Key
Key is used to freeze any sensor display. - MODE & ATM Keys
Pressing MODE and ATM keys at the same time will cause DRB-II to reset to copyright screen.