Windshield Wiper/Washer Switch Continuity

Windshield Wiper/Washer Switch is part of multi-function switch. Remove steering column upper and lower shroud and disconnect multi-function switch connector. See WIPER SWITCH under REMOVAL & INSTALLATION. Measure continuity between switch terminals at each switch position. Refer to WIPER/WASHER SWITCH CONTINUITY . See Fig 1 .

WIPER/WASHER SWITCH CONTINUITY

Position

Terminals

k/ohms

OFF

I To M

Open To 300

Delay Level

⁽¹⁾ I To M

9.72

I To M

8.22

I To M

6.61

I To M

5.12

I To M

3.67

⁽¹⁾ I To M

2.22

LOW

I To M

1.02

HIGH

I To M

0.51

WASH

I To W

Open

⁽¹⁾	Resistance at maximum delay position should be 9.72 k/ohms and at minimum delay position should be 2.22 k/ohms.

Fig 1: Identifying Wiper/Washer Switch Terminals

Courtesy of CHRYSLER CORP.