Test 9A - Mic Speedometer Faulty

WARNING: This page is about a different car, the 1993 Eagle Vision, 1993 Dodge Intrepid, and 1993 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For connector terminal identification, see CONNECTOR IDENTIFICATION . For appropriate wiring diagram, see WIRING DIAGRAMS at end of article.

Turn ignition on. Using DRB-II, select engine controller and read engine controller faults. If a vehicle speed sensor problem is indicated, refer to appropriate article in the ENGINE PERFORMANCE Section.
If a vehicle speed sensor problem is not indicated, use DRB-II to select body controller. Using DRB-II, read engine controller status. If DRB-II displays ACTIVE ON THE BUS, replace body controller module. Perform VERIFICATION PROCEDURE VER-1. If DRB-II does not display ACTIVE ON THE BUS, refer to VEHICLE COMMUNICATIONS TESTS .