Power Window Switch Test

Remove control switch from trim panel. Using ohmmeter, check continuity of switch. See MASTER WINDOW SWITCH CONTINUITY CHART and PASSENGER SIDE WINDOW SWITCH CONTINUITY CHART table. See Fig 1 or Fig 2 . Replace appropriate switch as necessary if switch continuity is not as specified.

Fig 1: Identifying Power Window Master Control Switch Pins

Courtesy of CHRYSLER CORP.

Fig 2: Identifying Power Window Passenger Control Switch Pins

Courtesy of CHRYSLER CORP.

MASTER WINDOW SWITCH CONTINUITY CHART

Switch Position		Check Continuity Between
Normal Position
Driver's OFF		Pins 2, 6 & 9
Passenger's OFF		Pins 3, 5 & 7
Driver's UP		Pins 2 & 6; Pins 8 & 9
Passenger's UP		Pins 3 & 8; Pins 5 & 7
Driver's DOWN		Pins 6 & 8; Pins 2 & 9
Passenger's DOWN		Pins 3 & 5; Pins 7 & 8
Window Lock Position
Normal		Pins 2 & 5
Lock		No Continuity

PASSENGER SIDE WINDOW SWITCH CONTINUITY CHART

Switch Position	Check Continuity Between
OFF	Pins 1 & 4; Pins 2 & 3
UP	Pins 1 & 4; Pins 3 & 6
DOWN	Pins 1 & 6; Pins 2 & 3