LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1996 >> Sebring JXi >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System & Component Testing - 2.5L VIN [H] >> Ignition System >> Distributor Cap
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Distributor Cap

A resistor is built into distributor cap. Remove distributor cap from engine. Disconnect coil wire. Using a DVOM, measure resistance between distributor cap center button and coil terminal. Resistance should be 5000 ohms. If resistance is not within specification, replace distributor cap. If resistance is within specification, distributor cap is okay.

scientia non olet · About LEMON Manuals