Hard Failures
WARNING: This page is about a different car, the 1996 Chrysler New Yorker and 1996 Chrysler LHS. However, it is still accessible from the selected car via links, so may be relevant.
Hard failures cause MIL to illuminate and remain on until problem is repaired. If light comes on and remains on during vehicle operation, cause of malfunction must be determined by retrieving DTCs. See RETRIEVING DIAGNOSTIC TROUBLE CODES under SELF-DIAGNOSTIC SYSTEM. If a sensor fails, PCM will use substitute value in its calculations to continue engine operation. In this condition, commonly known as limp-in mode, the vehicle runs but driveability will not be optimum.