LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 1997 >> LHS >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Cruise Control Systems) >> Self-Diagnostic System >> Retrieving Diagnostic Trouble Codes >> Using Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using Scan Tool

WARNING: This page is about a different car, the 1996 Eagle Vision, 1996 Dodge Intrepid, 1996 Chrysler New Yorker, 1996 Chrysler LHS, and 1996 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure battery is fully charged. Attempt to start engine. Turn ignition off. Connect scan tool to Data Link Connector (DLC), located below driver's side of instrument panel.
  2. Turn ignition on. Using scan tool manufacturer's instructions, record all DTCs displayed on scan tool. Using all DTCs obtained, proceed to TESTS W/CODES . Once all repairs are made, ensure DTCs are cleared from PCM. Refer to CLEARING DIAGNOSTIC TROUBLE CODES .
scientia non olet · About LEMON Manuals