Power Window Switch Test

Remove power window switch from trim panel. See POWER WINDOW SWITCH R & I . Using ohmmeter, check window switch continuity. See Fig 1 or Fig 2 . Refer to DRIVER'S WINDOW SWITCH CONTINUITY table or refer to PASSENGER'S WINDOW SWITCH CONTINUITY table. Replace window switch as necessary.

DRIVER'S WINDOW SWITCH CONTINUITY

Switch Position

Continuity Between Terminals No.

Driver's Side Switch

Off

2, 6 & 9

2 & 6; 8 & 9

Down Or Auto Down

6 & 8; 2 & 9

Passenger's Side Switch

Off

3 & 7

3 & 8

Down

7 & 8

Window Lock Switch

Normal

2 & 3; 2 & 7

Lock

⁽¹⁾

⁽¹⁾	Continuity should not exist between terminal No. 2 and terminals No. 3 and 7.

Fig 1: Identifying Driver's Power Window (Main) Switch Terminals

Courtesy of CHRYSLER CORP.

PASSENGER'S WINDOW SWITCH CONTINUITY

Switch Position	Continuity Between Terminals No.
Off	1 & 4; 2 & 3
Up	1 & 4; 3 & 6
Down	1 & 6; 2 & 3

Fig 2: Identifying Passenger's Power Window Switch Terminals

Courtesy of CHRYSLER CORP.