Verification Test VER-1A
- Reconnect all previously disconnected components and wiring. Turn ignition on. Use scan tool to erase trouble codes. Turn ignition off and wait at least 5 seconds and then turn ignition on (engine off).
- Operate system that was malfunctioning to verify correct operation. If system does not operate properly, go to SYMPTOM IDENTIFICATION TEST 1A in BODY CONTROL COMPUTER TESTS - BREEZE, CIRRUS, SEBRING CONVERTIBLE, STRATUS article. If system operates properly, read fault messages using scan tool. If any codes are present, go to SYMPTOM IDENTIFICATION TEST 1A in BODY CONTROL COMPUTER TESTS - BREEZE, CIRRUS, SEBRING CONVERTIBLE, STRATUS article. If no codes are present, repair is complete.