Removal (Neon)
- Release fuel pressure from fuel system. See FUEL SYSTEM PRESSURE RELEASE . Raise and support vehicle.
- Ensure negative battery cable is disconnected. Remove fuel tank cap to release any residual fuel tank pressure. Remove cap from fuel tank drain. Fuel tank drain is located on top of fuel tank, near filler tube. See Figure.
- Install siphon hose in fuel tank drain. Siphon gasoline into an approved gasoline container until fuel tank is empty. Disconnect fuel line from fuel filter/fuel pressure regulator on fuel pump module using proper procedure for fuel line disconnect fitting. See FUEL LINE DISCONNECT FITTINGS .
- Slide lock on fuel pump module electrical connector lock to the UNLOCK position. Push downward on the electrical connector retainer and pull electrical connector from fuel pump module.
- Support fuel tank with transmission jack. Loosen fuel tank straps. Slightly lower fuel tank. Disconnect necessary vapor hoses from fuel tank and filler tube from fuel tank. Remove fuel tank straps. Lower fuel tank from vehicle.