Window Regulator: Installation
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Insert roller channel through access hole in door panel.
- Insert bolt and screw heads through key hole slots in door panel.
- Tighten bolts attaching regulator to door panel.
- Tighten bolt to attach regulator support brace to door panel.
- Tighten screw to attach regulator scissor channel to door panel.
- Connect power window motor wire connector.
- Lower door glass on to regulator roller channel.
- Align glass and verify operation.
- Install pull cup support bracket, water shield, door trim panel and flag cover.