Instrument Panel End Cap: Removal

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.

Open the left door and pull on the access handle to disengage the end cap clips. Fuse diagram is located inside the left end cap. Fuse Access is under the left end cap (Fig 1 ).

Fig 1: Instrument Panel End Cover
Courtesy of DAIMLERCHRYSLER CORP.
Open the right door and remove the right end cover by inserting a trim stick (special tool #C-4755), between cap and instrument panel to disengage clips.