LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Air Conditioning Controls) >> A/C Heater Control >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

A/C Heater Control: Installation

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the control into place on the back of the instrument panel center bezel and install the six retaining screws to the a/c heater control.
  2. Connect the two electrical connectors to the back of the control head and traction control switch (if equipped).
  3. Install the instrument panel center bezel.
  4. Install the ash receiver assembly, if necessary.
  5. Connect the negative battery cable remote terminal to the remote battery post.
  6. To allow the BCM to learn the new control head, perform HVAC system calibration. (Refer to STANDARD PROCEDURE - HVAC SYSTEM CALIBRATION )
scientia non olet · About LEMON Manuals