A/C Pressure Transducer: Installation
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Install the a/c pressure transducer on the discharge line fitting and tighten to 6 N.m (50 in.lbs.).
- Plug in the wire harness connector to the a/c pressure transducer.
- Connect the battery negative cable to the remote battery post.